Unlock deeper multi-jurisdiction research
Full sub-pages, saves, and alerts are available on paid plans.
Pakistan Infrastructure
Infrastructure, energy, and urban development indicators
Overview
Infrastructure, energy, and urban development indicators for Pakistan, sourced from the World Bank and Ookla Open Data.
Key Indicators
Data Explorer
Ores and metals comprise the commodities in SITC (Rev. 3) sections 27 (crude fertilizer, minerals nes); 28 (metalliferous ores, scrap); and 68 (non-ferrous metals). Imports of services are services provided by non-residents to residents. This indicator is expressed as a percentage of merchandise imports which is comprised of goods whose economic ownership is changed between a non-resident and a resident and that are not included in the following specific categories: goods under merchanting, non-monetary gold, and parts of travel, construction, and government goods and services n.i.e.
Ores and metals comprise the commodities in SITC (Rev. 3) sections 27 (crude fertilizer, minerals nes); 28 (metalliferous ores, scrap); and 68 (non-ferrous metals). Exports of services are services provided by residents to non-residents. This indicator is expressed as a percentage of merchandise exports which is comprised of goods whose economic ownership is changed between a resident and a non-resident and that are not included in the following specific categories: goods under merchanting, non-monetary gold, and parts of travel, construction, and government goods and services n.i.e.
Fuels comprise the commodities in SITC (Rev. 3) section 3 (mineral fuels, lubricants and related materials). This indicator is expressed as a percentage of merchandise exports which is comprised of goods whose economic ownership is changed between a resident and a non-resident and that are not included in the following specific categories: goods under merchanting, non-monetary gold, and parts of travel, construction, and government goods and services n.i.e.
Fuels comprise the commodities in SITC (Rev. 3) section 3 (mineral fuels, lubricants and related materials). This indicator is expressed as a percentage of merchandise imports which is comprised of goods whose economic ownership is changed between a non-resident and a resident and that are not included in the following specific categories: goods under merchanting, non-monetary gold, and parts of travel, construction, and government goods and services n.i.e.
Access to electricity, urban is the percentage of urban population with access to electricity.
Access to electricity, rural is the percentage of rural population with access to electricity.
Access to electricity is the percentage of population with access to electricity. Electrification data are collected from industry, national surveys and international sources.
Net energy imports are estimated as gross imports less gross exports, both measured in tons of oil equivalents (toe). A negative value indicates that the country is a net exporter. Energy use refers to use of primary energy before transformation to other end-use fuels, which is equal to indigenous production plus imports and stock changes, minus exports and fuels supplied to ships and aircraft engaged in international transport.
Losses due to electrical outages, as percentage of total annual sales. The value represents average losses for all firms which reported outages (please see indicator IC.ELC.OUTG.ZS).
The Private Participation in Infrastructure (PPI) Database records contractual arrangements for public infrastructure projects in low- and middle-income countries (as classified by the World Bank) that have reached financial closure, in which private parties assume operating risk. Investment in energy projects with private participation refers to commitments to infrastructure projects in energy (electricity and natural gas: generation, transmission and distribution) that have reached financial closure and directly or indirectly serve the public. The types of projects included are management and lease contracts, brownfield projects, greenfield projects (in which a private entity or a public-private joint venture builds and operates a new facility), and divestitures. Investments are classified as one of two types: (1) Investments in physical assets: resources the project company commits to invest in expanding and modernizing facilities and (2) payments to the government: to acquire state-owned enterprises or rights to provide services in a specific area or to use radio spectrum. Data is presented based on investment year. Data are in current U.S. dollars.
Energy use refers to use of primary energy before transformation to other end-use fuels, which is equal to indigenous production plus imports and stock changes, minus exports and fuels supplied to ships and aircraft engaged in international transport.
Electric power consumption measures the production of power plants and combined heat and power plants less transmission, distribution, and transformation losses and own use by heat and power plants.
Combustible renewables and waste comprise solid biomass, liquid biomass, biogas, industrial waste, and municipal waste, measured as a percentage of total energy use. The indicator expresses the share of total energy supply.
Electric power transmission and distribution losses include losses in transmission between sources of supply and points of distribution and in the distribution to consumers, including pilferage. The losses are expressed as a share of the total output.
Clean energy is noncarbohydrate energy that does not produce carbon dioxide when generated. It includes hydropower and nuclear, geothermal, and solar power, among others. This is the share of total energy supply that is non-fossil.
Energy use per PPP GDP is the kilogram of oil equivalent of energy use per constant PPP GDP. Energy use refers to use of primary energy before transformation to other end-use fuels, which is equal to indigenous production plus imports and stock changes, minus exports and fuels supplied to ships and aircraft engaged in international transport. PPP GDP is gross domestic product converted to 2021 constant international dollars using purchasing power parity rates. An international dollar has the same purchasing power over GDP as a U.S. dollar has in the United States.
Fossil fuel comprises coal, oil, petroleum, and natural gas products.
Percentage of firms using banks to finance purchases of fixed assets.
Average wait, in days, experienced to obtain electrical connection from the day this establishment applied for it to the day it received the service.
GDP per unit of energy use is the PPP GDP per kilogram of oil equivalent of energy use. PPP GDP is gross domestic product converted to current international dollars using purchasing power parity rates based on the 2017 ICP round. An international dollar has the same purchasing power over GDP as a U.S. dollar has in the United States.
The share of electricity production from natural gas sources of total electricity production. Sources of electricity refer to the inputs used to generate electricity. Gas refers to natural gas but excludes natural gas liquids.
GDP per unit of energy use is the PPP GDP per kilogram of oil equivalent of energy use. PPP GDP is gross domestic product converted to 2021 constant international dollars using purchasing power parity rates. An international dollar has the same purchasing power over GDP as a U.S. dollar has in the United States.
The share of electricity production from hydroelectric sources of total electricity production. Sources of electricity refer to the inputs used to generate electricity. Hydropower refers to electricity produced by hydroelectric power plants.
The share of electricity production from coal sources of total electricity production. Sources of electricity refer to the inputs used to generate electricity. Coal refers to all coal and brown coal, both primary (including hard coal and lignite-brown coal) and derived fuels (including patent fuel, coke oven coke, gas coke, coke oven gas, and blast furnace gas). Peat is also included in this category.
The share of electricity production from oil sources of total electricity production. Sources of electricity refer to the inputs used to generate electricity. Oil refers to crude oil and petroleum products.
The share of electricity production from oil. gas and coal sources of total electricity production. Sources of electricity refer to the inputs used to generate electricity. Oil refers to crude oil and petroleum products. Gas refers to natural gas but excludes natural gas liquids. Coal refers to all coal and brown coal, both primary (including hard coal and lignite-brown coal) and derived fuels (including patent fuel, coke oven coke, gas coke, coke oven gas, and blast furnace gas). Peat is also included in this category.
The share of electricity production from nuclear sources of total electricity production. Sources of electricity refer to the inputs used to generate electricity. Nuclear power refers to electricity produced by nuclear power plants.
Oil rents are the difference between the value of crude oil production at regional prices and total costs of production.
Renewable energy consumption is the share of renewables energy in total final energy consumption.
Mineral depletion is the ratio of the value of the stock of mineral resources to the remaining reserve lifetime (capped at 25 years). It covers tin, gold, lead, zinc, iron, copper, nickel, silver, bauxite, and phosphate. This indicator is expressed in current prices, meaning no adjustment has been made to account for price changes over time. This indicator is expressed in United States dollars.
Energy depletion is the ratio of the value of the stock of energy resources to the remaining reserve lifetime (capped at 25 years). It covers coal, crude oil, and natural gas. This indicator is expressed as a percentage of Gross National Income (GNI) which is the total income earned by all residents within an economic territory during an accounting period. It is equal to gross domestic product plus earned income receivable from abroad minus earned income payable abroad.
Natural gas rents are the difference between the value of natural gas production at regional prices and total costs of production.
Mineral rents are the difference between the value of production for a stock of minerals at world prices and their total costs of production. Minerals included in the calculation are tin, gold, lead, zinc, iron, copper, nickel, silver, bauxite, and phosphate.
The share of electricity production from renewable sources of total electricity production. Electricity production from renewable sources, excluding hydroelectric, includes geothermal, solar, tides, wind, biomass, and biofuels.
Natural resource depletion is the sum of net forest depletion, energy depletion, and mineral depletion. Net forest depletion is unit resource rents times the excess of roundwood harvest over natural growth. Energy depletion is the ratio of the value of the stock of energy resources to the remaining reserve lifetime (capped at 25 years). It covers coal, crude oil, and natural gas. Mineral depletion is the ratio of the value of the stock of mineral resources to the remaining reserve lifetime (capped at 25 years). It covers tin, gold, lead, zinc, iron, copper, nickel, silver, bauxite, and phosphate. This indicator is expressed as a percentage of Gross National Income (GNI) which is the total income earned by all residents within an economic territory during an accounting period. It is equal to gross domestic product plus earned income receivable from abroad minus earned income payable abroad.
Energy depletion is the ratio of the value of the stock of energy resources to the remaining reserve lifetime (capped at 25 years). It covers coal, crude oil, and natural gas. This indicator is expressed in current prices, meaning no adjustment has been made to account for price changes over time. This indicator is expressed in United States dollars.
Total natural resources rents are the sum of oil rents, natural gas rents, coal rents (hard and soft), mineral rents, and forest rents.
Renewable electricity is the share of electrity generated by renewable power plants in total electricity generated by all types of plants.
Electricity production from renewable sources in kilowatt-hour (kWh), excluding hydroelectric, includes geothermal, solar, tides, wind, biomass, and biofuels.
Energy intensity level of primary energy is the ratio between energy supply and gross domestic product measured at purchasing power parity. Energy intensity is an indication of how much energy is used to produce one unit of economic output. Lower ratio indicates that less energy is used to produce one unit of output.
Mineral depletion is the ratio of the value of the stock of mineral resources to the remaining reserve lifetime (capped at 25 years). It covers tin, gold, lead, zinc, iron, copper, nickel, silver, bauxite, and phosphate. This indicator is expressed as a percentage of Gross National Income (GNI) which is the total income earned by all residents within an economic territory during an accounting period. It is equal to gross domestic product plus earned income receivable from abroad minus earned income payable abroad.
Information and communication technology service exports include computer and communications services (telecommunications and postal and courier services) and information services (computer data and news-related service transactions).
The number of distinct, publicly-trusted TLS/SSL certificates found in the Netcraft Secure Server Survey (by hosting country).
The number of distinct, publicly-trusted TLS/SSL certificates found in the Netcraft Secure Server Survey (by hosting country), per 1 million people.
Information and communication technology service exports include computer and communications services (telecommunications and postal and courier services) and information services (computer data and news-related service transactions). Data are in current U.S. dollars.
Fixed broadband subscriptions refers to fixed subscriptions to high-speed access to the public Internet (a TCP/IP connection), at downstream speeds equal to, or greater than, 256 kbit/s. This includes cable modem, DSL, fiber-to-the-home/building, other fixed (wired)-broadband subscriptions, satellite broadband and terrestrial fixed wireless broadband. This total is measured irrespective of the method of payment. It excludes subscriptions that have access to data communications (including the Internet) via mobile-cellular networks. It should include fixed WiMAX and any other fixed wireless technologies. It includes both residential subscriptions and subscriptions for organizations.
Fixed broadband subscriptions refers to fixed subscriptions to high-speed access to the public Internet (a TCP/IP connection), at downstream speeds equal to, or greater than, 256 kbit/s. This includes cable modem, DSL, fiber-to-the-home/building, other fixed (wired)-broadband subscriptions, satellite broadband and terrestrial fixed wireless broadband. This total is measured irrespective of the method of payment. It excludes subscriptions that have access to data communications (including the Internet) via mobile-cellular networks. It should include fixed WiMAX and any other fixed wireless technologies. It includes both residential subscriptions and subscriptions for organizations.
Fixed telephone subscriptions refers to the sum of active number of analogue fixed telephone lines, voice-over-IP (VoIP) subscriptions, fixed wireless local loop (WLL) subscriptions, ISDN voice-channel equivalents and fixed public payphones.
Internet users are individuals who have used the Internet (from any location) in the last 3 months. The Internet can be used via a computer, mobile phone, personal digital assistant, games machine, digital TV etc.
Fixed telephone subscriptions refers to the sum of active number of analogue fixed telephone lines, voice-over-IP (VoIP) subscriptions, fixed wireless local loop (WLL) subscriptions, ISDN voice-channel equivalents and fixed public payphones.
Mobile cellular telephone subscriptions are subscriptions to a public mobile telephone service that provide access to the PSTN using cellular technology. The indicator includes (and is split into) the number of postpaid subscriptions, and the number of active prepaid accounts (i.e. that have been used during the last three months). The indicator applies to all mobile cellular subscriptions that offer voice communications. It excludes subscriptions via data cards or USB modems, subscriptions to public mobile data services, private trunked mobile radio, telepoint, radio paging and telemetry services.
Mobile cellular telephone subscriptions are subscriptions to a public mobile telephone service that provide access to the PSTN using cellular technology. The indicator includes (and is split into) the number of postpaid subscriptions, and the number of active prepaid accounts (i.e. that have been used during the last three months). The indicator applies to all mobile cellular subscriptions that offer voice communications. It excludes subscriptions via data cards or USB modems, subscriptions to public mobile data services, private trunked mobile radio, telepoint, radio paging and telemetry services.
The Private Participation in Infrastructure (PPI) Database records contractual arrangements for public infrastructure projects in low- and middle-income countries (as classified by the World Bank) that have reached financial closure, in which private parties assume operating risk. Investment in energy projects with private participation refers to commitments to infrastructure projects in energy (electricity and natural gas: generation, transmission and distribution) that have reached financial closure and directly or indirectly serve the public. The types of projects included are management and lease contracts, brownfield projects, greenfield projects (in which a private entity or a public-private joint venture builds and operates a new facility), and divestitures. Investments are classified as one of two types: (1) Investments in physical assets: resources the project company commits to invest in expanding and modernizing facilities and (2) payments to the government: to acquire state-owned enterprises or rights to provide services in a specific area or to use radio spectrum. Data is presented based on investment year. Data are in current U.S. dollars.
The Private Participation In Infrastructure (PPI) Database records contractual arrangements for public infrastructure projects in low- and middle-income countries (as classified by the World Bank) that have reached financial closure, in which private parties assume operating risk. Public private partnerships in energy refers to commitments to infrastructure projects in energy (electricity and natural gas: generation, transmission, and distribution) that have reached financial closure and directly or indirectly serve the public. The types of projects included are management and lease contracts, brownfield projects, and greenfield projects (in which a private entity or a public-private joint venture builds and operates a new facility). Divestitures and merchant projects are excluded. Investments are classified as one of two types: (1) Investments in physical assets: resources the project company commits to invest in expanding and modernizing facilities and (2) Payments to the government: to acquire state-owned enterprises or rights to provide services in a specific area or to use radio spectrum. Data is presented based on investment year. Data are in current U.S. dollars.
Electric power consumption measures the production of power plants and combined heat and power plants less transmission, distribution, and transformation losses and own use by heat and power plants.
Port container traffic measures the flow of containers from land to sea transport modes, and vice versa, in twenty-foot equivalent units (TEUs), a standard-size container. Data refer to coastal shipping as well as international journeys. Transshipment traffic is counted as two lifts at the intermediate port (once to off-load and again as an outbound lift) and includes empty units.
Electric power transmission and distribution losses include losses in transmission between sources of supply and points of distribution and in the distribution to consumers, including pilferage. The losses are expressed as a share of the total output.
Renewable internal freshwater resources flows refer to internal renewable resources (internal river flows and groundwater from rainfall) in the country. Renewable internal freshwater resources per capita are calculated using the World Bank's population estimates.
Annual freshwater withdrawals refer to total water withdrawals, not counting evaporation losses from storage basins. Withdrawals also include water from desalination plants in countries where they are a significant source. Withdrawals can exceed 100 percent of total renewable resources where extraction from nonrenewable aquifers or desalination plants is considerable or where there is significant water reuse. Withdrawals for agriculture and industry are total withdrawals for irrigation and livestock production and for direct industrial use (including withdrawals for cooling thermoelectric plants). Withdrawals for domestic uses include drinking water, municipal use or supply, and use for public services, commercial establishments, and homes. Data are for the most recent year available for 1987-2002.
Annual freshwater withdrawals refer to total water withdrawals, not counting evaporation losses from storage basins. Withdrawals also include water from desalination plants in countries where they are a significant source. Withdrawals can exceed 100 percent of total renewable resources where extraction from nonrenewable aquifers or desalination plants is considerable or where there is significant water reuse. Withdrawals for agriculture are total withdrawals for irrigation and livestock production. Data are for the most recent year available for 1987-2002.
Annual freshwater withdrawals refer to total water withdrawals, not counting evaporation losses from storage basins. Withdrawals also include water from desalination plants in countries where they are a significant source. Withdrawals can exceed 100 percent of total renewable resources where extraction from nonrenewable aquifers or desalination plants is considerable or where there is significant water reuse. Withdrawals for industry are total withdrawals for direct industrial use (including withdrawals for cooling thermoelectric plants). Data are for the most recent year available for 1987-2002.
Annual freshwater withdrawals refer to total water withdrawals, not counting evaporation losses from storage basins. Withdrawals also include water from desalination plants in countries where they are a significant source. Withdrawals can exceed 100 percent of total renewable resources where extraction from nonrenewable aquifers or desalination plants is considerable or where there is significant water reuse. Withdrawals for agriculture and industry are total withdrawals for irrigation and livestock production and for direct industrial use (including withdrawals for cooling thermoelectric plants). Withdrawals for domestic uses include drinking water, municipal use or supply, and use for public services, commercial establishments, and homes.
The share of electricity production from oil sources of total electricity production. Sources of electricity refer to the inputs used to generate electricity. Oil refers to crude oil and petroleum products.
The share of electricity production from coal sources of total electricity production. Sources of electricity refer to the inputs used to generate electricity. Coal refers to all coal and brown coal, both primary (including hard coal and lignite-brown coal) and derived fuels (including patent fuel, coke oven coke, gas coke, coke oven gas, and blast furnace gas). Peat is also included in this category.
The share of electricity production from natural gas sources of total electricity production. Sources of electricity refer to the inputs used to generate electricity. Gas refers to natural gas but excludes natural gas liquids.
Annual freshwater withdrawals refer to total water withdrawals, not counting evaporation losses from storage basins. Withdrawals also include water from desalination plants in countries where they are a significant source. Withdrawals can exceed 100 percent of total renewable resources where extraction from nonrenewable aquifers or desalination plants is considerable or where there is significant water reuse. Withdrawals for domestic uses include drinking water, municipal use or supply, and use for public services, commercial establishments, and homes. Data are for the most recent year available for 1987-2002.
Renewable internal freshwater resources flows refer to internal renewable resources (internal river flows and groundwater from rainfall) in the country.
The share of electricity production from nuclear sources of total electricity production. Sources of electricity refer to the inputs used to generate electricity. Nuclear power refers to electricity produced by nuclear power plants.
The share of electricity production from hydroelectric sources of total electricity production. Sources of electricity refer to the inputs used to generate electricity. Hydropower refers to electricity produced by hydroelectric power plants.
Information and communication technology goods exports include computers and peripheral equipment, communication equipment, consumer electronic equipment, electronic components, and other information and technology goods (miscellaneous).
Information and communication technology goods imports include computers and peripheral equipment, communication equipment, consumer electronic equipment, electronic components, and other information and technology goods (miscellaneous).
The Liner Shipping Connectivity Index captures how well countries are connected to global shipping networks. It is computed by the United Nations Conference on Trade and Development (UNCTAD) based on five components of the maritime transport sector: number of ships, their container-carrying capacity, maximum vessel size, number of services, and number of companies that deploy container ships in a country's ports. For each component a country's value is divided by the maximum value of each component in 2004, the five components are averaged for each country, and the average is divided by the maximum average for 2004 and multiplied by 100. The index generates a value of 100 for the country with the highest average index in 2004. . The underlying data come from Containerisation International Online.
Air passengers carried include both domestic and international aircraft passengers of air carriers registered in the country.
Air freight is the volume of freight, express, and diplomatic bags carried on each flight stage (operation of an aircraft from takeoff to its next landing), measured in metric tons times kilometers traveled.
Registered carrier departures worldwide are domestic takeoffs and takeoffs abroad of air carriers registered in the country.
A trademark is a sign capable of distinguishing the goods or services of one enterprise from those of other enterprises. Trademarks are protected by intellectual property rights. A resident application refers to an application filed with the IP office of, or acting for, the state or jurisdiction in which the first named applicant in the application is resident. Class count is used to render application data for trademark applications across offices comparable, as some offices follow a single-class/single-design filing system while other have a multiple class/design filing system.
A trademark is a sign capable of distinguishing the goods or services of one enterprise from those of other enterprises. Trademarks are protected by intellectual property rights. Non-resident application refers to an application filed with the IP office of or acting on behalf of a state or jurisdiction in which the first-named applicant in the application is not domiciled. Class count is used to render application data for trademark applications across offices comparable, as some offices follow a single-class/single-design filing system while other have a multiple class/design filing system.
Industrial design applications are applications to register an industrial design with a national or regional Intellectual Property (IP) offices and designations received by relevant offices through the Hague System. A resident application refers to an application filed with the IP office of, or acting for, the state or jurisdiction in which the first named applicant in the application is resident. Design count is used to render application data for industrial applications across offices comparable, as some offices follow a single-class/single-design filing system while other have a multiple class/design filing system.
Industrial design applications are applications to register an industrial design with a national or regional Intellectual Property (IP) offices and designations received by relevant offices through the Hague System. Non-resident application refers to an application filed with the IP office of or acting on behalf of a state or jurisdiction in which the first-named applicant in the application is not domiciled. Design count is used to render application data for industrial applications across offices comparable, as some offices follow a single-class/single-design filing system while other have a multiple class/design filing system.
This indicator refers to female individuals who have used the Internet (from any location) in the last 3 months. The Internet can be used via a computer, mobile phone, personal digital assistant, games machine, digital TV etc.
This indicator refers to male individuals who have used the Internet (from any location) in the last 3 months. The Internet can be used via a computer, mobile phone, personal digital assistant, games machine, digital TV etc.
The total length of rail line in the country operated for passenger transport, goods transport, or both.
The Private Participation In Infrastructure (PPI) Database records contractual arrangements for public infrastructure projects in low- and middle-income countries (as classified by the World Bank) that have reached financial closure, in which private parties assume operating risk. Public private partnerships in transport refers to commitments to infrastructure projects in transport [(a) airport runways and terminals, (b) railways (including fixed assets, freight, intercity passenger, and local passenger); (c) toll roads, bridges, highways, and tunnels, (d) port infrastructure, superstructures, terminals, and channels)] that have reached financial closure and directly or indirectly serve the public. The types of projects included are management and lease contracts, brownfield projects, and greenfield projects (in which a private entity or a public-private joint venture builds and operates a new facility). Divestitures and merchant projects are excluded. Investments are classified as one of two types: (1) Investments in physical assets: resources the project company commits to invest in expanding and modernizing facilities and (2) Payments to the government: to acquire state-owned enterprises or rights to provide services in a specific area or to use radio spectrum. Data is presented based on investment year. Data are in current U.S. dollars.
The Private Participation In Infrastructure (PPI) Database records contractual arrangements for public infrastructure projects in low- and middle-income countries (as classified by the World Bank) that have reached financial closure, in which private parties assume operating risk. Investment in transport projects with private participation refers to commitments to infrastructure projects in transport [(a) airport runways and terminals, (b) railways (including fixed assets, freight, intercity passenger, and local passenger); (c) toll roads, bridges, highways, and tunnels, (d) port infrastructure, superstructures, terminals, and channels)] that have reached financial closure and directly or indirectly serve the public. The types of projects included are management and lease contracts, brownfield projects, greenfield projects (in which a private entity or a public-private joint venture builds and operates a new facility), and divestitures. Investments are classified as one of two types: (1) Investments in physical assets: resources the project company commits to invest in expanding and modernizing facilities and (2) payments to the government: to acquire state-owned enterprises or rights to provide services in a specific area or to use radio spectrum. Data is presented based on investment year. Data are in current U.S. dollars.
Goods transported by railway are the volume of goods transported by railway, measured in metric tons times kilometers traveled.
Passengers carried by railway are the number of passengers transported by rail multiplied by kilometers traveled.
The Private Participation in Infrastructure (PPI) Database records contractual arrangements for public infrastructure projects in low- and middle-income countries (as classified by the World Bank) that have reached financial closure, in which private parties assume operating risk. Investment in ICT projects with private participation refers to commitments to infrastructure projects in ICT (including land based and submarine cables except purely private telecoms. Instead, it will track ICT backbone infrastructure (fiber optic cables etc) that has an active government component) that have reached financial closure and directly or indirectly serve the public. The types of projects included are management and lease contracts, brownfield projects, greenfield projects (in which a private entity or a public-private joint venture builds and operates a new facility), and divestitures. Investments are classified as one of two types: (1) Investments in physical assets: resources the project company commits to invest in expanding and modernizing facilities and (2) payments to the government: to acquire state-owned enterprises or rights to provide services in a specific area or to use radio spectrum. Data is presented based on investment year. Data are in current U.S. dollars.
Personal computers are self-contained computers designed to be used by a single individual.
Population in urban agglomerations of more than one million is the percentage of a country's population living in metropolitan areas that in 2018 had a population of more than one million people.
Population in largest city is the urban population living in the country's largest metropolitan area.
Population in urban agglomerations of more than one million is the country's population living in metropolitan areas that in 2018 had a population of more than one million people.
Population in largest city is the percentage of a country's urban population living in that country's largest metropolitan area.
Urban population refers to people living in urban areas as defined by national statistical offices. It is calculated using World Bank population estimates and urban ratios from the United Nations World Urbanization Prospects. Aggregation of urban and rural population may not add up to total population because of different country coverages.
Urban population refers to people living in urban areas as defined by national statistical offices. The data are collected and smoothed by United Nations Population Division.
Annual urban population growth rate for year t is the exponential rate of growth of midyear urban population from year t-1 to t, expressed as a percentage. Urban population refers to people living in urban areas as defined by national statistical offices. It is calculated using World Bank total population estimates and urban ratios from the United Nations World Urbanization Prospects.
Access to electricity, urban is the percentage of urban population with access to electricity.
Population density is midyear population divided by land area in square kilometers. Population is based on the de facto definition of population, which counts all residents regardless of legal status or citizenship--except for refugees not permanently settled in the country of asylum, who are generally considered part of the population of their country of origin. Land area is a country's total area, excluding area under inland water bodies, national claims to continental shelf, and exclusive economic zones. In most cases the definition of inland water bodies includes major rivers and lakes.
Population living in slums is the proportion of the urban population living in slum households. A slum household is defined as a group of individuals living under the same roof lacking one or more of the following conditions: access to improved water, access to improved sanitation, sufficient living area, housing durability, and security of tenure, as adopted in the Millennium Development Goal Target 7.D. The successor, the Sustainable Development Goal 11.1.1, considers inadequate housing (housing affordability) to complement the above definition of slums/informal settlements.
Population-weighted exposure to ambient PM2.5 pollution is defined as the average level of exposure of a nation's population to concentrations of suspended particles measuring less than 2.5 microns in aerodynamic diameter, which are capable of penetrating deep into the respiratory tract and causing severe health damage. Exposure is calculated by weighting mean annual concentrations of PM2.5 by population in both urban and rural areas.
Mortality caused by road traffic injury is estimated road traffic fatal injury deaths per 100,000 population.
Percent of population exposed to ambient concentrations of PM2.5 that exceed the WHO guideline value is defined as the portion of a country’s population living in places where mean annual concentrations of PM2.5 are greater than 10 micrograms per cubic meter, the guideline value recommended by the World Health Organization as the lower end of the range of concentrations over which adverse health effects due to PM2.5 exposure have been observed.
Urban land area in square kilometers, based on a combination of population counts (persons), settlement points, and the presence of nighttime lights. Areas are defined as urban where contiguous lighted cells from the nighttime lights or approximated urban extents based on buffered settlement points for which the total population is greater than 5,000 persons.
Urban land area below 5m is the percentage of total land where the urban land elevation is 5 meters or less.
Urban land area below 5m is the total urban land area in square kilometers where the elevation is 5 meters or less.
Urban population below 5m is the percentage of the total population, living in areas where the elevation is 5 meters or less.
Frequently Asked Questions
Subscribe to unlock the full sub-page depth for additional jurisdictions.
You can keep discovering Oyster publicly, but full multi-jurisdiction depth, tracking, alerts, and exports are part of paid access.